50 amp rectifier

Product Information

The SAGEON® Micro 24V Series 12 amp to 50 amp rectifiers use a switched-mode module designed to provide up to 50A of output current into a 24VDC nominal system.

These rectifiers is available in 12A, 25A, 34A and 50A models and have been designed to be used in conjunction with a battery to provide an uninterruptable DC power system. The low noise and high reliability mean that the Sageon Micro 50 amp rectifier is ideally suited to  telecommunications applications.

From 1 to 27 50 amp rectifiers can be configured as a system using one control and supervisory unit (SAGEON® Plant Controller).

The system can be monitored and controlled remotely using SageView® software.


Features and Options
  • >88% typical efficiency
  • 12A to 50A models
  • Wide input voltage range
  • Thermal protection
  • Hot-swappable
  • International standards compliance
Voltage Nominal Range: 120 – 240VAC
Permitted variation: 85 – 275VAC
(L-PE and N-PE <250VAC)
Derating see datasheet
Current see datasheet
Power Factor >0.98 typical
Voltage Range


24.0 – 29.0V


25.0 – 29.5V

Current Limit20% -120% of Rated Output
Power Limit Current limit is automatically reduced in direct proportion to input voltage and in inverse proportion to output voltage
Line RegulationBetter than ± 0.05%
Load RegulationTerminal voltage drops by 0.42V ± 0.03V from zero to full load (for passive current sharing) for stand alone units, or regulates to better than ±0.05% for SAGEON® Controller controlled units
Dynamic Regulation± 2% for 10% to 90% to 10% step load change, ± 1% of final value within 1ms of step change, ± 0.2% for a 25% step change in AC input voltage
Noise< 0.96mV RMS Psophometrically weighted, < 32dBrnC, < 10mV RMS (10kHz – 100MHz),< 100mV peak to peak (10kHz – 100MHz
Load SharingBetter than ± 5% of full scale with active current sharing from the SAGEON® Controller
Protection Fusing – protects against reverse polarity connection and protects DC bus if internal components fail; Hot pluggable – no surge when connection is made to a live DC bus; Overvoltage – only faulty unit shuts down; Overcurrent – can sustain short circuit at output terminals indefinitely; Over-temperature – gradual reduction of power limit if heatsink temperature exceeds pre-set limit. Supplementary thermal overload production is provided
Voltage Withstand Test 1000 VAC output to chassis for one minute (1500VDC 100% testing on production units for 2 seconds)
SafetyIEC60950:1999; AS/NZS 60950:2000; UL60950:2000
EMCETSI EN 300 386 V1.3.2 (2002-12)
EnvironmentalETSI EN 300 019
Dimensions, inches (mm)8.5 (216) W x 1.7 (43) H x 10 (255) H
Weight5.1lb / 2.3kg
Mounting / IntegrationHot-Plug in Sageon Micro, Sageon II or SAgeon III DC Power Systems
CoolingForced convection cooling using two 40mm fans mounted internally with variable speed temperature control. Rectifier draws cool air from the front and exhausts warmed air to the back. Fan stops if AC power fails or rectifier inhibited remotely
Operating Temperature Range-40°F (-40°C) to 158°F (70°C)
Full power range(6A, 12.5A, 25AH, 50A): -40°F (-40°C) to 131°F (55°C), 50% power at 158°F (70°C)
Full power range(25AL, 34A): -40°F (-40°C) to 122°F (50°C), 50% power at 149°F (65°C), 25% power at 158°F (70°C)
Storage & Transport-40°F (-40°C) to 158°F (70°C)
Humidity0 to 100% RH condensing including dripping water and icing conditions
AltitudeOperational to 13,100 ft (4,000 m) (Consult factory above 13,000 ft). Derate maximum ambient temperature by 9°F (5°C) per 3,300 ft (1,000 m) above sea level
Acoustic Noise < 55dB (A weighted)
Operational Vibration 2-9Hz,displacement, 9-200Hz, 5m/s2, Continuous, any direction
Transport Vibration 2-9Hz, 3.5mm displacement, 9-200Hz,10m/s2 acceleration, 200-500Hz,15m/s2 acceleration One hour, any direction
Operational Shock 40m/s2 half sine, 11ms duration, any direction
Transport Shock180m/s2 half sine, (packaged) 6ms duration, any direction
Drop Test39.4 in (1m) drop all faces (packaged)
Model Number Output Voltage Output Current Output Power Input Voltage
100-7665-2412 24.0-29.5V12.0A440W85-275VAC
100-7665-2425 24.0-29.5V 25.0A 900W 85-275VAC
100-7665-2434 24.0-29.5V 34.0A 1200A 85-275VAC
100-7665-2450 24.0-29.5V 50.0A 1400A 85-275VAC
NOTE: Table shows all family models listed in the datasheet. For detailed power vs. input voltage derating see datasheet.

These rectifiers are only available for use in Sageon Family DC Power Systems.