120 Watt DC-DC Converters

Product Information

DCMOD® AM-120D SERIES is a 120 Watt DC-DC Converters platform with both standard and configurable models featuring output voltage(s) that can be quickly configured to order while maintaining all international safety approvals.

These 120 watt DC-DC Converters are available with 12, 24 or 48VDC input ranges and single, dual, triple or quad output configurations ranging from 1.5 to 48 VDC. The AM-120D features an industry-standard footprint, international safety approvals, Class B emissions; and -20 ~ +70°C operation (see derating).

DCMOD® 120 watt DC-DC Converters capabilities include a multitude of output voltage configurations, optional covers (with or without fan), extended temperature operating range, isolated outputs, attached wire harnesses and much, much more. All these modifications are available without any impact on safety approvals to reduce both development cost and time to market.

Features and Options
  • 12V, 24V or 48V DC Inputs
  • Optional 4:1 Input Range
  • Small 3.3 x 5.0 x 1.5” U-Frame Package
  • Five Year Warranty
  • 1~4 Outputs configurable from 1.5~48VDC
  • Remote Sense Option (V1 Only)
  • Optional Overtemperature Protection
  • >500k Hours MTBF Demonstrated
  • Optional -40°C GuaranteedStart-Up
  • Double Sided PC Board
Voltage Range 9-18VDC | 18-36VDC | 36-72VDC
EMI Filter, Conducted FCC Class B & VDE Class B
Fusing 20A @ 12VDC | 15A @ 24VDC | 8A @ 48VDC

90W Convection | 120W with 30 cfm Airflow

Efficiency 75% Typical
Adjustment Range (V1 Only)±5%
Ripple / Noise, max. 1% pk-pk max.
Line Regulation ±0.2% max.
Load Regulation @ 60% ±40% Full Load

V1: ±3% max.
V2-V4: ±5% max.

Cross Regulation @ 60% ± 40% Full Load V1: Change in V2 - V4: ±0.5%
V2 - V4: Change in V1 @75 ±25% F/L: ±5% max.
Overvoltage Protection (V1 Only) >130% (Latch Off)
Power Limit >120% (Auto-Recovery)
Overshoot (all outputs) 10% max.
Response Time 500μSec (25-75% step load)
Switching Frequency 60KHz (typical)
Operating Temp. Range-20°C to +50°C (Full Load)
Consult factory for -40°C Guaranteed Start-Up and Industrial Temperature Range options
Output Current Derating2.5%/°C, 50°C to 70°C
Storage Temp. Range -40°C to + 85°C
Humidity 5% to 95%, Non-Condensing
MTBF, Demonstrated >500,000 Hours
Cooling 30 cfm Airflow for Full Power
ImmunityEN61000-4-2; -3; -4; -5; -6; -8; -11
Altitude10,000 feet
Case Dimensions5.00 x 3.30 x 1.50” / 127 x 83.8 x 38.1mm
Weight 1.2 lbs. (0.6 kg.)
Vibration from 10 - 55Hz1.0G Peak
.(3 orthogonal axes @ 1 octave/min, 5 minute dwell @ 4 major resonances)
EMCFCC Class B & VDE Class B, CISPR 22; EN 55022 Class B
SafetyUL60950-1 2nd Ed., EN60950-1 2nd Ed., CB REPORT (IEC 60950-1), CE MARK (LVD)


The DCMOD® family of switched mode DC-DC converters has been designed with two precepts; (1) the laws of physics are immutable, and (2) the satisfaction of customer requirements and needs is paramount.

A host of modifications, only some of which are listed below, can and will be performed on products for customer programs requiring as few as 250 units per year. These “mods” are available at nominal premium (if any), normally without non-recurring engineering costs (although a one time documentation fee may be incurred), and usually with all safety agency approvals in place. This minimizes both product development cost and new product time to market. Effectively, DCMODs® DC/DC converters allow small program requirements the luxury of costly custom power supply designs.


  • Unique Output Combinations from 1.5 to >48 volts
  • Power Fail / Power Good Signals
  • Enable / Inhibit
  • Isolated Outputs
  • Low Output Ripple and Noise
  • Cover & Fan Assembly
  • Extended Temperature Operating Range
  • -40°C Start-Up
  • Zero Load Operation
  • Remote Sense
  • Remote On / Off

CALL: +1-954-905-1070

EMAIL: the.power.solution@unipowerco.com

Looking for the AC input version of this product? Click HERE.
Looking for the Medical Approved version of this product? Click HERE.